Timken EE107105 Bearing

Timken EE107105 Bearing

TIMKEN EE107057/EE107105 tapered roller bearing can minimize friction than other brands, because of the interrelationship of their four basic parts. TIMKEN EE107057/EE107105 bearing inner ring, or cone, is mounted onto the shaft. The outer ring, or cup, sits in the housing (hub). The tapered...
Chat Now

Product Details

TIMKEN EE107057/EE107105 tapered roller bearing can minimize friction than other brands, because of the interrelationship of their four basic parts. TIMKEN EE107057/EE107105 bearing inner ring, or cone, is mounted onto the shaft. The outer ring, or cup, sits in the housing (hub). The tapered rollers, or rolling elements, allow relative motion between the cone and cup thus minimizing friction between the two. The cage, or separator, spaces and holds the rolling elements in the proper position. The races are the surfaces on the cup and cone where the rolling elements make contact.

In TIMKEN EE107057/EE107105 bearing, EE means Inner Race. Large and small ribs-close guided rollers. (Non-interchangeable with other inner races identified with same basic part numbers).

 

Brand:TIMKEN bearings

Series:TIMKEN bearing EE107057/EE107105

Cone Bore:146.050 mm

Cone Width:74.612 mm

R:6.4 mm

Cone Weight:11.72 KG

Cup Dia:268.288 mm

Cup Width:57.150 mm

Cup Weight:5.83 KG

Type:Single row tapered roller bearing

TIMKEN EE107105 (2)_副本.jpgTIMKEN EE107105 (3)_副本.jpgTIMKEN EE107105_副本.jpg



Inquiry